pokered/engine/menu/league_pc.asm

PKMNLeaguePC: ; 0x7657e
	ld hl, AccessedHoFPCText
	call PrintText
	ld hl, wd730
	set 6, [hl]
	push hl
	ld a, [wcfcb]
	push af
	ld a, [$ffD7]
	push af
	xor a
	ld [$ffD7], a
	ld [W_SPRITEFLIPPED], a
	ld [wcfcb], a
	ld [wTrainerScreenX], a
	ld [wcd42], a
	ld a, [wd5a2]
	ld b, a
	cp a, $33
	jr c, .first
	ld b, $32
	sub b
	ld [wcd42], a
.first
	ld hl, wcd42
	inc [hl]
	push bc
	ld a, [wTrainerScreenX]
	ld [wWhichTrade], a
	callba Func_73b3f
	call Func_765e5
	pop bc
	jr c, .second
	ld hl, wTrainerScreenX
	inc [hl]
	ld a, [hl]
	cp b
	jr nz, .first
.second
	pop af
	ld [$ffD7], a
	pop af
	ld [wcfcb], a
	pop hl
	res 6, [hl]
	call GBPalWhiteOutWithDelay3
	call ClearScreen
	call GoPAL_SET_CF1C
	jp GBPalNormal

Func_765e5: ; 765e5 (1d:65e5)
	ld c, 6
.third
	push bc
	call Func_76610
	call WaitForTextScrollButtonPress
	ld a, [hJoyHeld]
	bit 1, a
	jr nz, .fifth
	ld hl, wcc6b
	ld de, wcc5b
	ld bc, $0050
	call CopyData
	pop bc
	ld a, [wcc5b]
	cp a, $FF
	jr z, .fourth
	dec c
	jr nz, .third
.fourth
	and a
	ret
.fifth
	pop bc
	scf
	ret

Func_76610: ; 76610 (1d:6610)
	call GBPalWhiteOutWithDelay3
	call ClearScreen
	ld hl, wcc5b
	ld a, [hli]
	ld [wWhichTrade], a
	ld [wcf91], a
	ld [wd0b5], a
	ld [wBattleMonSpecies2], a
	ld [wcf1d], a
	ld a, [hli]
	ld [wTrainerFacingDirection], a
	ld de, wcd6d
	ld bc, $000B
	call CopyData
	ld b, $0B
	ld c, 0
	call GoPAL_SET
	FuncCoord 12, 5
	ld hl, Coord
	call GetMonHeader
	call LoadFrontSpriteByMonIndex
	call GBPalNormal
	FuncCoord 0, 13
	ld hl, Coord
	ld b, 2
	ld c, $12
	call TextBoxBorder
	FuncCoord 1, 15
	ld hl, Coord
	ld de, HallOfFameNoText
	call PlaceString
	FuncCoord 16, 15
	ld hl, Coord
	ld de, wcd42
	ld bc, $0103
	call PrintNumber
	ld b, BANK(Func_702f0)
	ld hl, Func_702f0
	jp Bankswitch

HallOfFameNoText: ; 76670 (1d:6670)
	db "HALL OF FAME No   @"

AccessedHoFPCText: ; 76683 (1d:6683)
	TX_FAR _AccessedHoFPCText
	db "@"
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`PKMNLeaguePC: ; 0x7657e`
			`ld hl, AccessedHoFPCText`
			`call PrintText`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld hl, wd730`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`set 6, [hl]`
			`push hl`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld a, [wcfcb]`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`push af`
			`ld a, [$ffD7]`
			`push af`
			`xor a`
			`ld [$ffD7], a`
			`ld [W_SPRITEFLIPPED], a`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld [wcfcb], a`
			`ld [wTrainerScreenX], a`
			`ld [wcd42], a`
			`ld a, [wd5a2]`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld b, a`
			`cp a, $33`
			`jr c, .first`
			`ld b, $32`
			`sub b`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld [wcd42], a`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`.first`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld hl, wcd42`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`inc [hl]`
			`push bc`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld a, [wTrainerScreenX]`
			`ld [wWhichTrade], a`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`callba Func_73b3f`
			`call Func_765e5`
			`pop bc`
			`jr c, .second`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld hl, wTrainerScreenX`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`inc [hl]`
			`ld a, [hl]`
			`cp b`
			`jr nz, .first`
			`.second`
			`pop af`
			`ld [$ffD7], a`
			`pop af`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld [wcfcb], a`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`pop hl`
			`res 6, [hl]`
			`call GBPalWhiteOutWithDelay3`
			`call ClearScreen`
			`call GoPAL_SET_CF1C`
			`jp GBPalNormal`

			`Func_765e5: ; 765e5 (1d:65e5)`
			`ld c, 6`
			`.third`
			`push bc`
			`call Func_76610`
			`call WaitForTextScrollButtonPress`
Rename joypad registers. 2014-05-25 17:51:53 +00:00			`ld a, [hJoyHeld]`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`bit 1, a`
			`jr nz, .fifth`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld hl, wcc6b`
			`ld de, wcc5b`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld bc, $0050`
			`call CopyData`
			`pop bc`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld a, [wcc5b]`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`cp a, $FF`
			`jr z, .fourth`
			`dec c`
			`jr nz, .third`
			`.fourth`
			`and a`
			`ret`
			`.fifth`
			`pop bc`
			`scf`
			`ret`

			`Func_76610: ; 76610 (1d:6610)`
			`call GBPalWhiteOutWithDelay3`
			`call ClearScreen`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld hl, wcc5b`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld a, [hli]`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld [wWhichTrade], a`
			`ld [wcf91], a`
			`ld [wd0b5], a`
Use monster struct macros in wram. Rename related labels for consistency. 2014-06-14 11:12:40 +00:00			`ld [wBattleMonSpecies2], a`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld [wcf1d], a`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld a, [hli]`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld [wTrainerFacingDirection], a`
			`ld de, wcd6d`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld bc, $000B`
			`call CopyData`
			`ld b, $0B`
			`ld c, 0`
			`call GoPAL_SET`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`FuncCoord 12, 5`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld hl, Coord`
			`call GetMonHeader`
			`call LoadFrontSpriteByMonIndex`
			`call GBPalNormal`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`FuncCoord 0, 13`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld hl, Coord`
			`ld b, 2`
			`ld c, $12`
			`call TextBoxBorder`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`FuncCoord 1, 15`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld hl, Coord`
			`ld de, HallOfFameNoText`
			`call PlaceString`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`FuncCoord 16, 15`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld hl, Coord`
Remove most static wram addresses. Use labels instead. For unknown addresses, use "w<address>". Label overleads are still an issue. 2014-05-26 21:04:56 +00:00			`ld de, wcd42`
$U-Fish-PC\Daniel$ Pull a lot of engine out of main.asm 2014-05-22 22:13:20 +00:00			`ld bc, $0103`
			`call PrintNumber`
			`ld b, BANK(Func_702f0)`
			`ld hl, Func_702f0`
			`jp Bankswitch`

			`HallOfFameNoText: ; 76670 (1d:6670)`
			`db "HALL OF FAME No @"`

			`AccessedHoFPCText: ; 76683 (1d:6683)`
			`TX_FAR _AccessedHoFPCText`
			`db "@"`